Meets or exceeds: EIA 625, MIL-HDBK-263
and MIL-STD-1686
This
extremely thick, 3 layer advanced
fusion vinyl
/ foam / vinyl bench
top matting features
the best cushioning properties
in the industry combined
with aggressive static
decay rates. The top
layer is a wear resistant,
easy to clean static
dissipative Vinyl having
sufficiently low resistance
to discharge static-laden
conductors, while preventing
the shorting of pins
on the backs of printed
circuit boards laid on
the mat. The middle layer
is a thin highly conductive
scrim providing and the
aggressive static decay
while the bottom layer
is a energy absorbing
vinyl foam finished with
a non skid profile. This
product provides the
cushioning desirable
when working with hard
drives and other (mechanically)
shock sensitive devices
while providing the electrostatic
charge decay and resistivity
recommendations of EOS
ESD 2020 as well as most
other stringent standards.
SIZES AVAILABLE:
Precut
18" x 23"
(12 per box)
Roll
30" x 60'
3' x 60'
Custom Cuts Available
ELECTRICAL PROPERTIES: PTP: <5.5 X 107 @ 10 Volts per EOS / ESD 4.1 RTG: <5.5 X 107 @ 10 Volts per EOS / ESD 4.1
Surface Resistivity: < 109 per EOS / ESD S11.11
CHARGE DECAY: Conditioning: 50% RH +/- 2% @ 230C +/- 10C for 24 Hours Test conducted @: 50% RH +/- 2% @ 230C +/- 10C.
Test results = Time, seconds to decay to 10% of initial charge Results: <2.0 seconds
PHYSICAL PROPERTIES: Thickness: 3/8" Note: All custom and precut mats are cut within + or - .125". Optional: Comfort
Cushion Elite - 1/4" Colors: Blue Available in custom cut or roll form
Contact Ground Zero for full details and specifications
1-877-GND-ZERO (463-9376)
3/8" Thick
with a conductive scrim
(fleece), a perfect conductor
for our ESD
constant
monitors, (must be used with a push and
cinch
type snap
About Ground Zero's ESD and Static Control Table Matting ESD mats for work bench tops and tables are a dependable method of controlling static, but don't get fooled. All mats DO NOT perform the same. Some fade with use, some just aren't conductive enough (or too conductive) to pass critical audits. ALL of our custom cuts and roll goods are checked prior to shipment to your facility. EACH & EVERY custom cut mat is tested to the latest standards and comes with a certification to help with your ISO needs. READY to go to work in your environment with professional looks, heavy duty grounding hardware and complete certified confidence.
At Ground Zero your needs count! We offer a full selection of ESD mat materials for use in bench top coverings and flooring runners. Available in both Bulk Form (rolls) or Custom Cut ESD matting that meets your size requirements. Our "custom cuts" can be shipped with or without grounding hardware or peel-and-stick adhesive (so your mats won't slide around) and can be configured with our static control constant monitors. But best of all no wasted material, hassles or cut fingers.
