PMT-872A
Wrist Strap & Footwear Checker with PFP-861 Plate
Evaluate the resistance of both wrist straps and footwear
A unique, highly protable, battery operated multi-function PASS/FAIL
performance verifier. It confirms the operational resistance
range of single and dual conductor wrist straps, heel straps
and ESD controlled footwear. The PMT-872 features a large test
button, audible PASS BEEP with Green PASS light, Red LOW and
HIGH Fail lights and Yellow Battery Low Indicator.
Additional connections are provided for an optional AC-DC Power
adapter and for testing dual conductor wrist straps. A front
panel toggle switch allows testing of wrist straps and footwear
at one station. A footwear test plate, snap connector and lead
are provided.
SPECIFICATIONS:
PMT-872 Wrist Strap/Footwear Checker
Test Voltage & Current:
Nominal 9 volts and 0.006 µA to 1.0 mA
Power:
One (1) standard 9-volt battery, PROCELL, Eveready #216 (NEDA
1604, JIS 006P, IEC 6F22); or, Optional AC/DC converter.
Factory Adjusted Measurement Ranges & Accuracy
WRIST STRAPS: 8.0x105 Ohms to 1.0x107 Ohms < ±5% (Factory
Default)
FOOTWEAR: 8.0x105 Ohms to 1.0x108 Ohms < ±5% (Factory
Default)
WRIST STRAPS: 8.0x105 Ohms to 3.5x107 Ohms < ±5%
FOOTWEAR: 8.0x105 Ohms to 3.5x107 Ohms < ±5%
Toggle Range Selection:
UP for Wrist Straps and DOWN for Footwear
Push Button:
27 mm Diameter, Metal spring loaded
Light Indicators (Vertically Oriented. From Top to Bottom):
FAIL High: Red LED
PASS: Green LED with Audible Buzzer
FAIL Low: Red LED
BATTERY LOW: Yellow LED (At <8.2V Battery Voltage)
Audible Signal:
Fast, Individual "Beeping" Sound with Green PASS LED
on.
Operating Range:
5ºC to 49ºC (40ºF to 120ºF)
Storage Temp:
-15ºC to 60ºC (5ºF to 140ºF)
Relative Humidity:
0% to 90%
Battery Life:
40 hours typical
Dimensions:
115 mm x 69 mm x 26 mm
Weight:
6 oz.
PFP-861 Footplate
Foot Plate:
Stainless Steel 8.5 x 11 inches with 1/8 inch insulated back
plate, 10mm male snap installed
Snap Connector:
Female 10mm snap with attached banana receptacle
Lead Assembly:
Green, six (6) foot stranded copper equipped with standard male
banana plugs at each end
Technical Documents:
» PMT-872A Data Sheet
|