Grounding ESD and Static Control Flooring - Carpet, Vinyl Tile, Epoxy Floors, Rubber Flooring
Poured ESD - Static Control Epoxy Floors
[Home]

ESD / Static Control Poured Epoxy Flooring: Urethanes

ESD / Static Control Poured Epoxy Flooring: Urethanes
ESD / Static Control Poured Epoxy Flooring: Urethanes

When high gloss, stain resistance and abrasion resistance are critical, Ground Zero's premium urethane coatings are an excellent choice. Ground Zero's urethanes are two-component, thus curing independently of relative humidity to a high-gloss finish. The complete product line allows Ground Zero to formulate a system directly to meet your needs -- non-skid or smooth, glossy or satin, high chemical resistance to reduced chemical resistance, high wear resistance to normal wear resistance. Tell Ground Zero your problem and we'll design a system to meet your needs.

  • UV Light Resistance
  • High Gloss to Satin Finish
  • Excellent Abrasion Resistance
  • Unsurpassed Stain Resistance
  • Two-Component
  • Light Reflectance for Illumination of Workplace
  • Excellent Gloss Retention

Polyurethane Coatings

UR 9100 Polyurethane Coating
New UR 9100 is your new best choice for extremely abrasion resistant, low odor, high solids polyurethane flooring. UR 9100 is a three-component aliphatic polyurethane coating that offers advanced protection AND low odor, low VOC safety (less than 150 grams/liter). This high-solids, abrasion resistant floor coating is formulated to wear 2x longer than traditional urethane floor coatings. The coating contains proprietary, hard fillers which increase abrasion resistance.

UR 9100 is designed for use in very high traffic areas such as truck loading docks,warehouses and high traffic aisle ways. This versatile coating may be installed with a a beautiful satin or high gloss finish and makes an excellent clear topcoat for decorative applications.

WBUR 8000/8900
The WBUR 8000/8900 ZeroStat Crete series are odorless two and three component VOC compliant aliphatic waterborne polyurethane coatings. These coatings provide excellent chemical resistance, stain resistance and UV stability, as well as excellent sealing and adhesive properties.

UR 1000 Polyurethane Coating
UR 1000 is a high-gloss, aromatic polyether polyurethane coating. This economical coating offers better chemical resistance and gloss retention than an epoxy at comparable pricing. This coating can be applied directly to concrete with a special additive.

UR 3000 Polyurethane Coating
UR 3000 is a high-gloss, non-yellowing, aliphatic polyether polyurethane coating that resists most stains while offering good abrasion and chemical resistance. This topcoat is ideal for airport hangars and warehouses and similar industrial/commercial applications.


UR 5000 Polyurethane Coating
A UV-stable, aliphatic polyester polyurethane coating, UR 5000 has excellent abrasion, impact and chemical resistance against staining, including tire stains. In addition, UR 5000 has excellent gloss and light refelctance for better illumination of the workplace. Ideal for airport hangars, cleanrooms, laboratories, warehouses and similar industrial/commercial applications.

Ever-Wear TM 1000 Polyurethane Coating
Ever-Wear 1000 is a high-wear, aromatic, polyether polyurethane coating that has a satin appearance and a slight non-skid finish. It offers excellent wear resistance and good chemical resistance. This coating can be applied directly to concrete when used with a special additive.


Typical Physical Properties


 
WBUR 8000
WBUR 8900
UR 1000
UR 3000
UR 5000
Ever-Wear 100-
UR 6100
%Solids (By Volume)
As Supplied

45
47
54
54
52
58
96
Gloss
60°

90+
20-40
80-90
80-90
90+
60-70
90+
Abrasion Resistance
ASTM D 4060
Taber Abraser.
1000 gm. load per wheel
CS-17 Wheels
45-55 mgs/
1000 cycles
CS-17 Wheels
45-55 mgs/
1000 cycles
CS-17 Wheels
50-60 mgs/
1000 cycles
CS-17 Wheels
40-50 mgs/
1000 cycles
CS-17 Wheels
30-35 mgs/
1000 cycles
CS-17 Wheels
35-40 mgs/
1000 cycles
CS-17 Wheels
65-85 mgs/
1000 cycles
Impact Resistance
ASTM D 2794

140 in.-lbs
(157 cm-kg)
100 in.-lbs.(rev)
(112 cm-kg)
140 in.-lbs
(157 cm-kg)
100 in.-lbs.(rev)
(112 cm-kg)
140 in.-lbs
(157 cm-kg)
100 in.-lbs.(rev)
(112 cm-kg)
140 in.-lbs
(157 cm-kg)
100 in.-lbs.(rev)
(112 cm-kg)
140 in.-lbs
(157 cm-kg)
100 in.-lbs.(rev)
(112 cm-kg)
100 in.-lbs
(112 cm-kg)
direct & reverse
160 in.-lbs
(179 cm-kg)
direct & reverse
Flexibility
ASTM D 522
Conical Mandrel
1/8 in.
(.31 cm)
passes
1/8 in.
(.31 cm)
passes
1/8 in.
(.31 cm)
passes
1/8 in.
(.31 cm)
passes
1/8 in.
(.31 cm)
passes
1/8 in.
(.31 cm)
passes
1/8 in.
(.31 cm)
passes
Hardness
ASTM D 3363 Pencil

2B
2B
2H
2B
2H-3H
2H
N/A
Adhesion: Concrete
ASTM D 4541 Elcometer
Cannot be applied directly to concrete
Cannot be applied directly to concrete
350 psi
(2.4 MPA)
concrete
failure
Cannot be applied directly to concrete
Cannot be applied directly to concrete
350 psi
(2.4 MPA)
concrete
failure
Cannot be applied directly to concrete
Navigation
Technical Documents:
Free Samples
Free Estimate

arrow ZS Crete Premier - Epoxy
ZS Crete Premier
ZS Crete Premier- Corrosion
arrow