Shielding Gloves   bar
Clean Room Products - Gloves
Gloves [Home]
Powder-Free Cleanroom Gloves - Bagged

Powder-Free Cleanroom Gloves - Bagged

Glove Nitrile White, Class 10 (M1.5) Process, Ambidextrous Shape, Beaded Cuff, Fully Textured, 12" Length. Lot Control Quality Tested

Quantity:
100ea/Bag - 10 Bg/Cs

ITEM DESCRIPTION
GL-NC-12-XS Powder-Free CR Gloves-Extra Small
GL-NC-12-SM Powder-Free CR Gloves-Small
GL-NC-12-MD Powder-Free CR Gloves-Medium
GL-NC-12-LG Powder-Free CR Gloves-Large
GL-NC-12-XL Powder-Free CR Gloves-Extra Large
GL-NC-12-XX Powder-Free CR Gloves-Extra Extra Large

SPECIFICATIONS:

Surface Resistivity: below 108

Test Methods: Product conforms to the following test standards:

IES-RP-CC-005 Recommended Practice for Cleanroom Gloves
ASTM D3578-77 Standard Specifications for Rubber Examination Gloves
ASTM D412 Tensile Properties of Vulcanized Rubbers
ASTM D573 Accelerated Aging for Latex (at 70ºC for 166 hr.)
ASTM D5151 Standard Test for Detection of Holes in Medical Gloves

Quality Sampling Plan: MIL-STD-105E, Inspection Levels S-2, and S-4

Parameter
AQL
Inspection Level
Watertight
1.5
S-4
Dimensions
2.5
S-2
Physical
2.5
S-2
Properties
Major 1.5
S-4
Visual Defects
Minor 2.5
 

Visual Defects
Description:		 AQL 1.5 Major - Tears, visible holes, sticking pleats (> 10mm), embedded particles (> 5mm), large lumps, non-removable dirt, torn beads/cuffs, excessively thin
spots, tackiness, wrong size.

AQL 2.5 Minor - Stains and discoloration, sticking pleats (< 10mm), embedded particles (< 5mm), small lumps, loose dirt, or defective beads.

Dimensions and Tolerances:
 
Sizes
  
Parameter
Small
Medium
Large
X-Large
Tolerance mm
Width (mm)
77
86
98
102
+/- 10
Length (mm)  
290 min. for all sizes
    
Minimum Thickness  
(mm)
  
(mils)
  
Finger  
0.110
  
4.33
min.
Palm  
0.090
  
3.54 min.
min.
Cuff  
0.070
  
2.76
min.

Physical Properties:
Before Aging
After Aging
Tensile
Strength
Ultimate
Elongation
Tensile
Strength
Ultimate
Elongation
16 MPa min.
500% min.
15 MPa min.
500% min.

Physical Characteristics:
Particle Counts: Current Particle data available on request.
Extractables: Current Extractable data available on request.
Chemical Compatibility: Contact Manufacturer for Chemical Compatibility information.

Packaging and Markings:
Double bagged - 100 pieces per inner bag, which are unidirectionally packed
with cuffs toward the opening edge. Inner bags labeled with size, lot/batch number,
product description, and country of origin. Inner bags are packed in a heat sealed outer
bag. 10 bags per carton / 1 carton liner.

Double wall shipping carton labeled with size, lot/batch number, country of origin, and
product description.

Shelf Life and Storage:
All product delivered will have a minimum shelf life of 12 months. All product is stored and shipped in an environment appropriate for the materials, and the use.
 Cleanroom Vinyl Gloves

Cleanroom Vinyl Gloves

Cleanroom vinyl gloves are ideal for use in microelectronics, medical component manufacturing, and other cleanroom environments where a low particulate glove is needed. Vinyl carries an extremely low static charge providing excellent product protection for static-sensitive components. These smooth finish gloves are 5 mil thick providing excellent tactile sensitivity. Gloves are available in 9 or 12 inch lengths and Sizes S-XL

ITEM DESCRIPTION
GL0080-S-XL Cleanroom Vinyl Gloves 9"
GL0085-S-XL Cleanroom Vinyl Gloves 12”

arrow Trash Recepticles
Gloves
Finger Cots
arrow
We are the Largest ESD and Static Control Flooring Installer in the world!