PGK-820-MK Garment Test KitEspecially designed to measure the electrical resistance of static
control garments
PROSTAT Corporation's new PGK-820-MK Garment Test
Kit is designed specifically for measuring the resistance of
static control garments
per ESD Association Standard ESD STM2.1-1997, Garments. The new
kit features PROSTAT's PSI-870 resistance instrument for measuring
sleeve to sleeve and point to point resistance. This meter gives
simple, repeatable measurements to indicate whether a material
is conductive, static dissipative or insulative. The PSI-870 employs
parallel bar sensing and features an easy to read LED light scale.
In addition, the kit includes PROSTAT's specially designed PGC-821
Garment Clips, test leads and instructions. Attach them directly
to a garment's sleeves or hem for making either evaluation or audit
resistance measurements. These unique clips are designed for simple
connection to a resistance measurement instrument via banana input
receptacles. Clip flanges are insulated to provide electrical isolation
when making measurements.
SPECIFICATIONS
PSI-870 Surface Resistance/Resistivity Meter
Test Voltage & Current:
Nominal 9 volts and 0.006 µA to 1.0 mA
Power:
One (1) standard 9-volt battery, PROCELL, Eveready #216 (NEDA 1604,
JIS 006P, IEC 6F22)
Electrodes:
2 each Machined Brass, One (1) Square Resistivity configuration
Overall Accuracy:
± 10%
Changeover Point:
Based on measured resistance; ± 1/2 decade on logarithmic
scale (i.e., 3.16 x 10n)
Changeover Point Accuracy:
± 1/2 decade
Resolution:
One order of magnitude
LED Measurement Indications:
11 LED's with Dual scales:
103 to 1012 Ohms/square per ASTM 257 in one decade increments
102 to 1011 Ohms per S-11.11 in one decade increments
Over range indicator light for "Insulative" surfaces,
i.e., >1012 Ohms/square or >1011 Ohms.
Auxiliary Connections:
2 each female banana for resistance range performance verification
and direct point to point resistance measurements without electrodes.
1 each Point to Ground Phono Receptacle for resistance measurements
using one electrode
1 each Electrode cut off switch
Operation Control:
One (1) PUSH to TEST Button
Operating Range:
40ºF to 120ºF (5ºC to 49ºC)
Storage Temp:
-15ºC to 60ºC (5ºF to 140ºF), Relative Humidity:
0% to 90%
Battery Life:
40 hours typical
Dimensions:
115 mm x 69 mm x 26 mm
Weight:
6 oz.
PGC-821 Garment Clip
Size:
1 inch x 2 inch Electrodes mounted to an electrically conductive
clamp
Electrode Material:
Plated Steel
Test Lead Connection:
Brass, Nickel Plate conductive Banana Jack
Clamp Insulation:
Rubber Grommet measuring >1.0x1012 Ohms over a Heavy Duty Rubber
Coating Call Today to Order 1-877-463-9376
Technical Documents:
» PGK-820-MK
Data Sheet
|