Grounding ESD Flooring
ESD Flooring Accessories [Home]

Transitions and Reducers

INSTALLATION

Generally these parts are either glued, nailed, tacked or stapled into place. There are many products in this line and they all have various ways that they can be installed. Each installation may have different installation requirements, depending on that particular job situation.

If you have any general or specific installation questions please contact your Ground Zero representative.

RECCOMENDED ADHESIVES

The recommended adhesive for Ground Zero Mouldings is a flammable, solvent-based contact cement. Liquid Nails can also
be used.

MAINTENANCE

Mild soap and water should readily clean most situations. A polish is not necessary, however, a liquid floor polish can be used if glossy shine or extra protection are desired or if it is convenient due to being adjacent to a polished surface.

For any maintenance problems, call your Ground Zero representative for assistance.

AVAILABILTIY AND COSTS

Ground Zero Mouldings can be obtained from local distributors throughout the United States and Canada. For the name of your local distributor handling Ground Zero Mouldings, contact your Ground Zero representative.

WARRANTIES

Ground Zero Mouldings: 2 Year Limited Warranty

All Products Will:

  • Be free from defects in material and workmanship at the time of shipment
  • Conform, within reasonable variation allowable for this industry, to the description (size, color, pattern) on the sales order
  • Be sufficiently packaged and labeled
  • Not wear out within their respective warranty periods if properly installed, maintained, and used in the right conditions
Warranties Will Be Void If:
  • Ground Zero Adhesives are not used
    Products are not installed and maintained according to
  • Ground Zero instructions
  • Products are not first quality (ie. seconds, imperfects)
Conditions or Affects Not Warranted:
  • Exact color or pattern matches
  • Color degradation caused by sunlight or other excessive U.V. rays
  • Any indentation caused by high heels or any other force exceeding 600 p.s.i.
  • Problems caused by excessive moisture, hydro-static pressure, or alkali
  • Abuse or abnormal conditions
  • Exterior applications
WARRANTY TERMS:
Any defects must be reported to Ground Zero within 30 days after the discovery or defect. Always dry lay base before installation to inspect for defects. Ground Zero will not be liable for labor to remove and reinstall defective products that could have been replaced before installation. Ground Zero reserves the right to inspect all claims against our warranties. Ground Zero will not be liable for shipping costs of assumed defective products if the product is found not to be defective.

Ground Zero does not warranty any implied promise or guarantee by any salesmen or representative. Any special condition warranties must be in writing from Ground Zeros president or director of all flooring sales.

TECHNICAL SERVICES

Complete technical services, catalogs and samples are available from the manufacturer and Ground Zero representatives. For information or assistance, contact your Ground Zero
representative or a local Ground Zero distributor.

TECHNICAL DATA

Composition

Made of 100% first quality homopolymer vinyl

Installation

Install with high quality solvent-based contact adhesive for compatibility and warranty compliance

Application
All mouldings manufactured for heavy traffic areas

Applicable Standards
Class 1 Fire Rated (ASTM E-648)
New York State Fire Prevention Code
New York City Fire Prevention Code
ADA, OSHA

Technical Documents:
» Transistions and Reducers Data Sheet
» Transistions & Reducers MSDS


arrow Transitions - Main
Transitions and Reducers
Copper Tape
arrow