Grounding ESD, Condcutive, Dissipative and ESD Table and Bench Matting and Mats
Static Control Floor Matting [Home]

Insulative Switchboard Matting

Available in Corrugated, Smooth Top or Diamond finishes Insulative, Oil Resistant

Isolation from grounding is imperative for certain environments. Shock Stop switchboard matting, with Dielectric resistances of 20,000 to 30,000 volts (AC RMS) is an extraordinarily insulative floor runner material providing the utmost in electrical shock protection for those working in and around high voltage electrical equipment. Each roll of our switchboard matting is tested over the entire surface of the material to insure the consistency of its insulative properties and the safety of the user. Shock Stop meets all optional requirements for ozone and oil resistance yet conforms to a variety of Mil Specs while providing outstanding wear performance and longevity. Available in Corrugated, Smooth Top or Diamond finishes.

Contact Ground Zero for full details and specifications

Call Today to Order 1-877-463-9376




free samples
Call Today to Order 1-877-463-9376

Corrugated Switchboard Matting

  • A specially compounded non-conductive corrugated matting designed to help prevent electric shock around high voltage electrical equipment, such as fuse boxes, and control panels.
  • Now meets all optional requirements for Ozone Resistance, Flame Resistance, and Oil Resistance.

3/8" Thick, Type II, Class 3 Switchboard - Corrugated

• DIELECTRIC TEST VOLTAGE 40,000 VAC
• Prof Tested over entire surface at 30,000 VAC
• Recommended Maxim um Use Voltage 26,500 VAC

Stock # Size Weight/Lin.Ft
SB536
3´ x 45´
7.7 lbs.

Dielectric Test Voltage: 40.000 VAC
Proof Tested over entire surface at: 30.000 VAC

Recommended Maximum use voltage: 26.500 VAC

Color: Black. (Full rolls only).

Go To Specifications >>

Technical Documents:

» Floor Matting Specifications Sheet



free samples

Smooth Top Switchboard Matting

  • Conforms to MIL SPEC. MIL-DTL-15562G, Type II.
  • This specification is approved for use by all interested Commands of the Department of the Navy and the Marine Corps and is available for use by all other Departments and Agencies of the Department of Defense.
  • Dielectric Test Voltage 30,000 VAC
  • Proof Tested Over Entire Surface at 15,000 VAC
  • Recommended Maximum Use Voltave 3,000 VAC
1/8" Thick Mil. Spec. Mil-DTL-15562G, Type II
Stock # Size Weight per Roll
SSB36
3´ x 75´
245.0 lbs.

Colors: Black, Blue, Green (Full rolls only)

Go To Specifications >>

Technical Documents:

» Floor Matting Specifications Sheet



free samples

Diamond Switchboard Matting

  • Conforms to MIL SPEC. MIL-DTL-15562G, Type II.
  • This specification is approved for use by all interested Commands of the Department of the Navy and the Marine Corps and is available for use by all other Departments and Agencies of the Department of Defense.
  • Dielectric Test Voltage 30,000 VAC
  • Proof Tested Over Entire Surface at 15,000 VAC
  • Recommended Maximum Use Voltave 3,000 VAC
1/4" Thick, Type II, Class 2 Diamond Pattern
• DIELECTRIC TEST VOLTAGE 30,000 VAC
• Prof Tested over entire surface at 20,000 VAC
• Recommended Maxim um Use Voltage 17,000 VAC
 
Stock # Size Weight/Lin.Ft
SBD424
2´ x 75´
3.5 lbs.
SBD436
3´ x 75´
5.2 lbs.
SBD448
4´ x 75´
6.8 lbs.

Dielectric Test Voltage: 30.000 VAC
Proof Tested over entire surface at: 20.000 VAC

Recommended Maximum use voltage: 17.000 VAC

Color: Black
Go To Specifications >>

Technical Documents:

» Floor Matting Specifications Sheet

 

specifications:

Product Description

Product Name:

Corrugated Switchboard

Description:

ASTM D-178 – Type II, Class I

Surface Configuration: 

Top – Corrugated
Bottom – Knurled W/ certification engraved

Thickness:

3/16” Minimum

Thickness:

Excellent chemical resistance to many commercial and Industrial chemicals.  Please call for specific recommendations.

Physical Properties

Characteristics Performance Test Method
Tensile Strength 700 psi 

ASTM-D-412

Elongation 250%

ASTM-D-412

Moisture Absorption .08%     

ASTM-D-570

Flammability     Pass

ASTM-D-1692

Ozone Resistance Pass ASTM-D-1149, Method A
Accelerated Aging 90% of Original

ASTM-D-573

Oil Resistance   .5% Volume Increase

ASTM-D-471

Electrical Properties

Dielectric Test Voltage 20,000 VAC

ASTM-D-178

Proof Test Over Entire Surface at 20,000 VAC

ASTM-D-178

Recommended Max Use Voltage 7,500 VAC           

ASTM-D-178

About Ground Zero's ESD and Static Control Floor Matting

ESD(static control) floor mats for your electronic assembly area are an effective method of controlling electrostatic discharge as well as conforming to the latest recommendations of EOS /ESD 2020. At Ground Zero your needs count! We offer a full selection of static control matting materials for use as flooring runners and table top mats. Available in both Bulk Form (rolls) or Custom Cut floor mats that meet your size requirements. Our "custom cut's" include Heavy duty rolled (not punched snaps) and beveled hooded grounding cords. In addition, our static mats feature our famous conductive, peel and stick adhesive (so your floor mats won't slide around) and can be configured with our patented EOS/ESD compliant static collection display monitor.



arrow No Slip
Switchboard
Anti-Fatigue Matting
arrow