Grounding Flooring
Static Control and ESD Flooring
[Home]  

ElectraStat Specifications

Avoid electrostatic discharge and its unforeseeable consequences.
Specifications:

DIMENSIONS:
Thicknesses Available:

(ES-C2012, ES-C2013, ES-C2014, ES-C2015, ES-C2016)

rolle.gif ~ 12.2 m x 1.22 m/
~39.3' x 48"

fliese.gif ~ 61 cm x 61 cm/
~24" x 24"

 For access floor panels:
fliese.gif ~ 61.5 cm x 61.5 cm/
~24.2" x 24.2"

Technical Data:
Resistance to ground: Rtg < 106Ohm according to ESD S7.1, ASTM F-150

Conform to: ASTM-F-1344 – Rubber Floor Tile
ASTM-F-1859 – Rubber Sheet Flooring without Backing
ASTM-F-1860 – Rubber Sheet Flooring with Backing
Test
Average Test Results
Limited Conductivty Warranty in Years(a)
10
Limited Wear Warranty in Years
5
Taber Abrasion Test
According to ASTM D-3389
H-18 Wheel (1000 cycles)
500 gram load – grams weight loss
<.7
Extra Heavy Traffic (Forklift up to 850 psi)
No
Shore Hardness “A“ ASTM D-2240
≤.85"
Static Load Limit 1,000 Lbs./Sq. In
ASTM F-970 Residual Compression
≤.003"
Static Coefficient of Friction ASTM
D 2047-82 (min. .5)
ADA
Slip Resistance (Tiles, Sheets, Stairtreads) ≥.6
Inquire standard products for ramps where ≥ .8 is required.
Critical Radiant Flux ASTM E-648
(not less than .45 W/per cm2)
Class 1
NBS SMOKE DENSITY ASTM E-662
<450
Cigarette burn and solder resistance
Yes
Halogen-free
Yes
Resistance to: – acids – alkalies –
solvents – other chemicals (1)
Excellent, Call for Specifics
Oil and grease resistance
No
Static Generation Comparison
Less than 10 Volts per ESD STM 97.2* (c) ANSI/ESD S20.20
< 10
ESD-S7.1/ASTM F-150/iec 61340-5-1
(RH >30% at room temperature)
10 Year Limited Conductivity
Warranty (a)(ohms)
< 1 x 106
Decay-time FTM 101 C 4046 (sec.)
<.025
Compliance with Art. 15, Part 1120 State of N.Y. Fire Bulding Code DOS file # 09650-900613
(d)


Navigation
Technical Documents
free samples
free estimate
 


arrow ElectraStat-Colors
ElectraStat
UD2-Interlock
 arrow

 
We are the Largest ESD and Static Control Flooring Installer in the world!